La serie D2 è una serie di amplificatori professionali, completi di limitatore interno. Ideali per usi continui. Possibilità di uso a 'ponte'. Protetti contro sbalzi di tensione, sovracorrenti, e temperatura.

• Professional 2-channel amplifier with built-in active crossover.
• Power stereo 4Ω (1kHz, THD+N<0,1%) = 2x 600Wrms    
• Power bridge 8Ω (1kHz, THD+N<0,1%) = 1200Wrms
• Very compact housing, only 2U (88mm) high
• Oversized power supply guarantees a powerful bass reproduction
• Built-in active crossovers: no need for separate crossover units to setup an active system.
• Each channel equipped with a 24dB/octave crossover: adjustable crossover point (90~250Hz) and 3 operation modes: HPF (high pass filter) + LPF (low pass filter) + OFF (no filter)
• Two amplifier modes: stereo and bridge
• Peak limiters can be switched on/off
• Soft start power supply
• Very efficient cooling
• DC fault protection
• High temperature protection
• Overload and short circuit protections
• Balanced inputs with combo connectors (jack + XLR)
• XLR-outputs: daisy chaining of several amplifiers
• 3 Speakon® outputs: left + right channels + bridge
• 3 models with different output power available
• Power stereo 8Ω (1kHz, THD+N<0,1%)    2x 400Wrms   
  Power stereo 4Ω (1kHz, THD+N<0,1%)    2x 600Wrms
  Power bridge 8Ω (1kHz, THD+N<0,1%)    1200Wrms
  Freq. Resp. (+/-0.5dB) = 20-20.000Hz
  Built-in active crossover = 24dB/oct. crossover 90~250Hz
  Input sensitivity = 770mV
  Input impedance    = 20kΩ Balanced, 10kΩ unbalanced
  S/R ratio = >90dB
  Damping factor 8Ω/1kHz > 600
  Cooling    Dual speed fan cooling
  Input Connections = Balanced XLR, unbalanced Jack (COMBO)
  Output Connections = 3 Speakon® for Stereo & Bridge Output
  Power Supply = 230Vac / 50Hz
  Dimensions(mm) = 482 x 473 x 88
  Weigth (kg) = 19
  THD: < 0.1%
  Crosstalk @ Rated Output 8Ω/1kHz = < 75dB
  Protection: Soft Start, Short Circuit, Limiter, DC Fault, AC Line Fuse Thermal Cut